- #Smart card toolset pro v3.4.87 serial 1080p#
- #Smart card toolset pro v3.4.87 serial serial#
- #Smart card toolset pro v3.4.87 serial manual#
When more flexibility is desired, an SD card can be loaded with individual components (boot sdcard images contain these four elements
To bring up the board and run Linux, four elements are needed on the boot image: Interfaces, test SoC features, and run userspace applications. Without modifying the system, users can evaluate hardware The pre-built NXP Linux binary demo image provides a typical system and basic set of features for The latest pre-built images for the i.MX8MQuad EVK is available This is the simplest way to load all necessary components required toīoot the i.MX8MQuad EVK board. sdcard file is a disk image that is flashedĭirectly into any SD card. Experienced Linux developers can explore other options.ĭepending on the OS used in the host machine, the way to transfer the Linux BSP image onto an SD card canĬhoose an option below for detailed instructions:Ģ.2 Linux 2.2.1 Download an NXP Linux BSP pre-built imageĪ. There are various ways to download the Linux BSP image for different boards and boot devices.įor this getting started guide, only a few methods to transfer the Linux BSP image to an SD card are Additional documentationĬan be found the i.MX Linux documentation bundle, or under the Linux sections on the i.MX Software and Development Tool.īefore the Linux OS kernel can boot on an i.MX board, the Linux image is copied to a boot device (SDĬard, eMMC and so on) and the boot switches are set to boot that device.
#Smart card toolset pro v3.4.87 serial manual#
The Linux User Guide and Linux Reference Manual provide additional information. The i.MX Linux Board Support Package (BSP) is a collection of binary files, source code, and supportįiles that are used to boot an Embedded Linux image on a specific i.MX development platform.Ĭurrent releases of Linux binary demo files can be found on the i.MX Linux download page. This section is applicable ONLY if attempting to load a Linux operating system on the
The Android UI can be seen after the boot process is finished.
#Smart card toolset pro v3.4.87 serial 1080p#
Resolution is 1080P fixed - to change it, check the Android Documentation. Congratulations! Android has booted!ĭuring the boot process, the Android logo appears on the HDMI display. Process, it continues to boot the Linux kernel.
#Smart card toolset pro v3.4.87 serial serial#
Information is printed in the smaller number serial console for the Cortex-A53 ( COM9 on Windows as an example and /dev/ttyUSB* on Linux). Image, the U-Boot execution should begin automatically. The fuses to define the media where it is expected to have a bootable image. With the default boot switch setup, the code reads Processor starts executing from the on-chip ROM code. Power the board by flipping the switch ( SW701). Power on the EVK board by sliding power switch 1.5 Boot Switch SetupĬlick here to see the Boot Switch Setup 1.6 Connect Power SupplyĬonnect the plug of the 12 V power supply to the DC power jack J902. To see the user interface provided with the image binary connect a monitor via the HDMI connector ( J1001). Card disk image from a Linux host computerĪndroid BSP image using the Manufacturing Tool
0 kommentar(er)
